Sadržaj 3 : Konfigurisanje Focus Display-a (Brajevog reda):
3,1. Konfigurisanje Focus Display-a (Brajevog reda)
3,2. The Display Menu.
3,1. Konfigurisanje Focus Display-a (Brajevog reda)
Focus Brajev red - displej pruža nekoliko mogućnosti koje možete prilagoditi sopstvenim potrebama. Možete podesiti lokaciju statusne ćelije, definisati početak i kraj reda za čitanje, menjati veličinu Brajevih tačaka i omogućiti režim Brzog čitanja.
These settings are all adjusted using Settings Center (JAWS 12 or later). In Settings Center, choose Braille, then Advanced. For more information on using Settings Center, refer to the JAWS help for Settings Center. If you are using JAWS 11 or earlier, these settings are adjusted through the JAWS Configuration Manager.
Postavljanje statusne ćelije
Možete odrediti da li će se informacione statusne ćelije nalaziti sa leve ili desne strane displeja - Brajevog reda i izabrati da se uopšte ne prikazuju. Po pravilu, statusne ćelije se nalaze na levom kraju displeja (Brajevog reda).
Čitanje reda
Odredite početak i kraj ćelije za prikaz podataka. Koristite uređivački Spin boks (Edit Spin Boxes) Reading Line (redovi za čitanje) za prikaz informacija samo unutar dela displeja - Brajevog reda koji želite da koristite. Podrazumevana podešavanja određena su lokacijom statusnih ćelija i dužinom displeja - Brajevog reda.
Promenljiva visina Brajevih tačaka
Odredite visinu Brajevih tačaka na Focus Display (Brajevom redu). Postoji pet nivoa visina Brajevih tačaka. Podesite displej - Brajev red na nivo visine Brajevih tačaka koji najviše odgovara osetljivosti vaših prstiju.
Brzo čitanje
Podesite Focus Display (Brajev red) kako bi koristili samo 20 Brajevih ćelija. Ograničavanjem Brajevog reda - displeja na 20 ćelija možete povećati brzinu čitanja. Kada je polje za potvrdu (check box) Rapid Reading (Brzo čitanje) potvrđeno u dijalogu Focus Braille Options (opcije Brajevog pisma na Focusu), radio dugmad (Radio Buttons) Placement of Status Cells (postavljanje statusne ćelije) i uređivački Spin boks (Edit Spin Boxes) Reading Line (red za čitanje) su onemogućeni.
Nazad na: Sadržaj 3 : Konfigurisanje Focus Display-a (Brajevog reda):
3,2. The Display Menu
Pressing DOTS 1-4-7-8 CHORD while the Focus status information is displayed activates a menu where you can change the Focus display?s Bluetooth ID, change the key repeat interval for the NAV Rockers, and adjust the length of time the display will wait after a control is pressed before going to sleep.
When the menu first opens, you are on the Bluetooth ID. To move through the available settings, press DOTS 4-5 CHORD or DOTS 1-2 CHORD. To move through the available options for a setting, use the rocker bars. To exit the menu and save any changes you have made, press DOT 8. Press Z CHORD (DOTS 1-3-5-6 CHORD) to exit the menu without saving any changes. Pritisnite dugme za postavljanje pokazivača da se vratite na normalan rad.
The available menu options are described in the following sections.
Bluetooth ID
This option displays the Bluetooth ID used by the Focus 80 Blue to identify itself when pairing the display with a computer or mobile phone. The default Bluetooth ID for the Focus 80 is Focus 80 BT plus the 8-digit Bluetooth MAC address. The Bluetooth MAC address is different for each Focus display. This is useful if you will be pairing the Focus with a computer in an environment where there are other Focus Blue displays with Bluetooth enabled and you want to make sure you pair the correct one.
Key Repeat
This option controls how fast the NAV Rockers on the display repeat when held down for a length of time, such as when you want to scroll quickly through the items in a list. The four settings are off, slow, medium, and fast. Off is indicated by a full braille cell at the far left of the display in cell one. Two full braille cells indicate slow, three full braille cells indicate medium, and four full cells indicate fast. By default, two full cells are shown, which means the key repeat is set to slow.
Display Sleep Delay
This menu option lets you specify how long the Focus display waits after a control is pressed before it goes to sleep. You can choose to have the display go to sleep after 5, 15, 30, or 45 minutes of inactivity. The number 5 is indicated by dots 2-6, 15 by dot 2 and dots 2-6, 30 by dots 2-5 and dots 3-5-6, and 45 by dots 2-5-6 and dots 2-6.
Nazad na: Sadržaj 3 : Konfigurisanje Focus Display-a (Brajevog reda):